Tak Tractors manufactures Maize Sheller from 2 H.P to 10 H.P driven both by electric motor/diesel engine Tractors. Only the tractors of minimum 25 HP power are capable of driving the Tak Tractors Tractor-driven Maize Sheller. These shellers are provided with lift attachment to make it convenient to carry them from one place to other.

This is unique machine manufactured by us with latest technology for reliable, economical & efficient working. It is tractor driven and can be operated with 25 H.P tractor and above. After plucking the corn from the Maize plant it is directly put into the self-feeding chute without removing the skin/cover.

The upper drum is used for threshing and skin/cover dehusking while another drum, which is fitted at the bottom, is used for grains. The thrower is fitted to the upper drum. During threshing of maize the skin and wastage is thrown out by the thrower. The clear grains come out through sieves.

DESCRIPTION SIZE/ NOS.
ENGINE STAND 27" x 65" CHANNEL 75x40x5 MM = 49 KGS
ENGINE FIXING NUT AND BOLT 4"' x 3" 4 NOS. = 0.300 KGS
4" x 1.5" 4 NOS. = 0.200 KGS
ENGINE STAND FIXING WITH MACHINE FLAT 50x10 MM = 125 MM =8 PCS. = 4 KGS
FIXING - 5"' x 8"
ENGINE PULLEY 5"X2b 1 NO.= 1.7 KGS
MAIN SHAFT PULLEY 10"X2b 1 NO. = 5.1 KGS
V-BELT (ENGINE TO MAIN SHAFT) 2 NOS. = B-64=0.600 KGS
RIM, TYRES & AXLE (6.00 x 16) & (45 MM SQ.-59") 1 ASSEMBLY = 70 KGS
TRACTOR DRIVEN MAIZE SHELLER
TOTAL WIDTH FROM CAM SHAFT TO DOUBLE FAN SIEVE REAR END 42"
LENGTH INCLUDING LIFT ATTACHMENT + P.T.O. ATTACHMENT 82"
HEIGHT FROM GROUND FLOOR TO TOP HOPPER 82"
ANGLE FRAME 65x65x4.5 / 50x50x5 MM
MAIN SHAFT 51 MM DIA
DRUM COVER SHEET 2.5/2.0 MM THICK
OUTPUT 3000 TO 3500 KG/HOUR
PRIME MOVER MINIMUM 25 HP TRACTOR
WEIGHT APPROX. 350 KGS
ATTACHMENT
RIM, TYRES & AXLE (6.00X16) & (45MM SQ.-59") 1 ASSEMBLY = 79 KGS.
MOTOR / DIESEL ENGINE MODEL
LENGTH INCLUDING LIFT ATTACHMENT + P.T.O. ATTACHMENT 52"
WIDTH 36"
HEIGHT (WITHOUT TYRE SET) 60"
ANGLE FRAME 60 x 60 x 4.5 MM
DRUM COVER SHEET 2 MM THICK
MAIN SHAFT 40 MM DIA METER
THRESHING DRUMS RPM 575
PRIME MOVER 5 H.P ELECTRIC MOTOR / 6.5
DIESEL ENGINE
OUTPUT 1200 KGS / HOUR
WEIGHT (INCLUDING MOTOR STAND) 5 H.P ELECTRIC MOTOR / 6.5
APPROX.135 KGS
ATTACHMENT FOR 5 HP MOTOR - 1440 RPM
MOTOR FIXING NUT & BOLT 3'"x2" 4 NOS. = 0.250
MOTOR PULLEY 4"X2b 1 NO. = 1.3 KGS
MAIN SHAFT PULLEY 10"X2b 1 NO. = 5.1 KGS
V-BELT (MOTOR TO MAIN SHAFT) 2 NOS. = B-78 = 0.745 KGS
RIM, TYRES & AXLE (6.00 x 16) & (45 MM SQ.-59") 1 ASSEMBLY = 70 KGS